Toniebox holder for IKEA Skadis / Uppspel V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder to mount a Toniebox to an IKEA Skadis or Uppspel Pegboard
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 286
- Wydruki
- 2
- Wyświetlenia
- 1131
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for a Toniebox compatible with IKEA Skadis and Uppspel pegboards.
Update June 25 2024: I added a second Version to be used without the charging pad (running on battery) that has a the stub to hold the toniebox in place. Print both parts and glue together.
Printing
Use Support for the middle cutout.
Use of PETG recommended. Add a modifier to the hooks on the back and the rear 2-3mm and make them 80-90% infill, the rest can be printed with 10-15% infill.
Assembly
The charger should fit inside the cutout, may require a bit of force which is intended so the box can be removed without the charger falling out of the holder.
The cable can either be routed down the slot on the back or to the left or right.
Miscellaneous
Support
If you like this printable and want to support future projects, you can contribute to my next roll of filament on Ko-Fi. https://ko-fi.com/smallthings_ch