Hanging Hygrometer Case with joint Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hygrometer hanging case with joint hook for household/office/garage/car purposes
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 224
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple hygrometer hanging case for household/office/garage/car purpose. Case fits popular low cost eBay, Amazon, Aliexpress round hygrometer modules. Print fits perfectly to the module, also fitting area is thin for module replacement or re-use.
Hook can be rotated 360deg to set desired facing. Due to 3 different hook sizes and adjustable joint it can be used almost everywhere… shelves, cars, fridge, houseplant pots, and many more places..
I have printed/tested this model with 0.2 and 0.16mm layer height. Model is printed face down. Also for better visual appearance I like to play with swapping colors in the middle
If you plan to set this to position and leave it hanging for weeks, printing in PLA is sufficient. Otherwise please print with PETG/ASA/ABS preventing joint to become worn out specially if you have plans to use this outdoor or in car/vehicle. Make sure you print with temperature resistant filaments.
On the following link you can find my simple hygrometer stand: https://www.printables.com/model/715918-hygrometer-stands-round-and-square-9-12g
Also, I have created “Fancy” stand with rings that you can find on the following link: https://www.printables.com/model/716111-hygrometer-stand-with-rings-no-amsmmu-required
Enjoy, please rate, leave comments or suggestions if you like it or if you encounter issues.