1 / 3
Dew shield for Canon RF 24-240mm Lens for Astrophotography — zdjęcie 1
1 / 3

Dew shield for Canon RF 24-240mm Lens for Astrophotography

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An oversized lens hood turned dew shield, for protection from both dew and nearby light sources for backyard astronomy

Ocena
0 / 5
Polubienia
21
Pobrania
99
Wydruki
0
Wyświetlenia
593
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

I started doing astrophotography with just my mirrorless Canon EOS RP, and I'm loving it. While I'm saving up to get proper gear, I'm trying to spend the cloudy nights improving my current setup. Check out this Lens Stabilizer Ring too.

My backyard imaging suffers enough from the Bortle 9 city glow without the local streetlights and porch lights trying to shine directly on my lens. Dew shields to the rescue! The shorter dew shield works for ~150mm or longer focal length, and the even longer dew shield works for >180mm.

Very easy printing, works great in PLA at 0.2mm with Input Shaping Speed settings. It's worth supporting the bridges in the top portion of the mating ring with some organic, build-plate only supports if you don't want to be trimming loose extrusions.

Clumsily modified from the @neoyarus RF 50mm lens hood.

Tagi