1 / 2
FYSETC ERB/Burrow Board Cases (Beta)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cases designed for the FYSETC ERB/Burrow board.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I'm using this board to provide dual Z drivers for my Sovol SV06, but I don't want it floating around loose and unprotected. Unfortunately, the original mainboard case is already cramped, so I decided to try design some cases to resolve this issue.
- burrow4010.stl - This design allows for the use of a 4010 fan to help cool the drivers. This may or may not be required, but I did have some longer prints fail due to the drivers overheating.
- There is space underneath to stash some WAGO connectors/wiring. I'm splitting the incoming 24v/GND to power both the fan and the board. A future improvement would be to providing cable routing and/or sockets for the WAGOs.
- burrowSlim.stl - A slimline case without active cooling, purely for the physical protection of the board.