1:18 Scale Model Car Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your diecast cars on the wall, or any vertical surface using this simple and material effective shelf design.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 306
- Wydruki
- 1
- Wyświetlenia
- 2094
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I ran into the problem of wanting to display my cars on the side of my closet; however, after extensive Google searching, I've concluded that nothing in this very specific category exists. Therefore, I decided to create my own.
The shelf is made to be easily scalable in case you want to display any scale diecast cars. All you will need to do in that case is make it so that the width of the shelf isn't too large for your scale.
The shelf is also made to fit any 1:18 scale car, as you will position the shelves to fit the wheelbase independently. However, I've found that some rare 1:18 scale cars don't fit by width, so I will also post a version for wide cars.
There are two mounting holes on each, but I've found that you only need to use one for it to be stable, preferably the top one.
I printed it at a layer height of 0.3 and 15% infill, though I believe 10% would probably be just fine
Happy printing!