1 / 3
Sandpaper Organizer (Customizable)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a customizable sandpaper organizer. I designed it for 9 x 3.6 in sandpaper.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (13)Powiązane
This is a sandpaper organizer. I originally designed it for 9 x 3.6" sandpaper.
Main design features:
- Fillets everywhere. You won't get cut with this thing (some existing organizers did not have this).
- Easy in / out for the sandpaper dimensions I mentioned (9 x 3.6"). However you can change it to suit your needs.
A few tips on printing:
- Make sure that the base of the box is fully filled to prevent any printing failures.
- The pictures you see used 4 walls and I am pretty sure you can get away with 2 (please let the others know in the comments)
- I designed it to be “half length” so that material is saved. You can customize it in Fusion360 to increase the size if needed.
- The slot width/spacing is also customizable.
Fusion 360 Specific notes:
- I am not a power user. If you have tips on how to improve the F3D file, please let me know.
- The file is mostly parametric - you can change most things (slot width/length, slot spacing)
- The only gotcha is that if you want to change #slots Fusion will be slightly confused on what to extrude, but you can just select all the outer parts of the slots when changing that number and it's fixed).