1 / 4
Blue ROV2 or Water-tight enclosure desiccant holder — zdjęcie 1
1 / 4

Blue ROV2 or Water-tight enclosure desiccant holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hold desiccant beads in a reusable container within your enclosed volume, and prevent corrosion or dreaded dome-fog!

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Load up re-usable desiccant in this holder. Pop a piece of tape around the lid to keep any from escaping. Clip one end around the standoff at the back of a BlueROV2 enclosure, and rotate the part into the housing to clip onto the adjacent standoff. Close up your vehicle and keep the humidity away!

When the desiccant has changed color indicating it's full, remove and empty onto a paper towel. Microwave for 10-15 seconds at a time, opening the microwave and wafting the humid air out. Repeat 5-6 times until beads have thoroguly changed color. Reload into housing!

Find Onshape source document here - fork it and add features! Like a clip feature so you don't need to use tape!

Tagi