Air plant voronoi basket (wall mounted)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny basket (⌀32mm) for air plants!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Voronoi basket to mount in a wall ring! I made it for air plants but I'm sure there's more uses to it. The default diameter is 32mm but it can be scaled of course.
My cover pic prints look messy because I printed them in wood, but when printed in other materials it looks fine and soft.
To print:
Layer height: Any works, I print them at 0.2mm
Infill: I recommend enough walls (2 wall line count at least) to keep the basket with a 100% infill so it's not weak.
Supports!: Here's the little struggle, I recommend turning the supports off and adding a Custom Support to the handle. I posted a picture representing it. Another solution is to turn supports on and add a Support Blocker to the basket leaving the handle out of it.