Air plant voronoi basket (wall mounted)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.92 – €1.12 net (excluding VAT)
For file: CE3E3V2_Basket.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tiny basket (⌀32mm) for air plants!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 50
- Makes
- 0
- Views
- 624
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Voronoi basket to mount in a wall ring! I made it for air plants but I'm sure there's more uses to it. The default diameter is 32mm but it can be scaled of course.
My cover pic prints look messy because I printed them in wood, but when printed in other materials it looks fine and soft.
To print:
Layer height: Any works, I print them at 0.2mm
Infill: I recommend enough walls (2 wall line count at least) to keep the basket with a 100% infill so it's not weak.
Supports!: Here's the little struggle, I recommend turning the supports off and adding a Custom Support to the handle. I posted a picture representing it. Another solution is to turn supports on and add a Support Blocker to the basket leaving the handle out of it.