Cat dice (d6) holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dice tray for 6 14mm d6. It's held together with 8 magnets (10mm x 2.6mm)
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- GNU General Public License v3.0
I used these magnets: https://www.amazon.com/gp/product/B07D8QPG2Y/
I used these dice: https://www.aliexpress.us/item/3256805649407396.html
I printed these separately at .2mm layer height. For the bottom, I added one stop towards the end to put in the magnets. For the top, I added two stops, one early on for the magnet, and one for the filament change. The top needs supports, since it should be printed with the d6 openings facing the print bed.
8 magnets is definitely overkill, but I want it to stay shut. If I printed it again, I'd probably add some sort of lip or something to help with opening the tray.