Bambu X1C Over-Engineered Y-Pipe Splitter with Inlet Side PC4-M10 Push-Fit slightly improved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've added internal chamfers to the inlets in order to improve filament loading and make the entry smoother.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model is almost perfect. But I have encountered that sometimes the filament binds a bit at the entrance to the channel. This has not caused me any problems so far, but to completely eliminate their possibility, I made internal chamfers on the channel entrances and removed the sticking point altogether.
For BOM and instructions check the original model please.
I printed it with a 0.4mm nozzle at 0.08mm layer height, 10 wall loops and 9 top and bottom layers (which effectively causes 100% infill) in Bambulabs PLA Tough.