Bambu X1C Over-Engineered Y-Pipe Splitter with Inlet Side PC4-M10 Push-Fit slightly improved
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've added internal chamfers to the inlets in order to improve filament loading and make the entry smoother.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 152
- Makes
- 0
- Views
- 718
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The original model is almost perfect. But I have encountered that sometimes the filament binds a bit at the entrance to the channel. This has not caused me any problems so far, but to completely eliminate their possibility, I made internal chamfers on the channel entrances and removed the sticking point altogether.
For BOM and instructions check the original model please.
I printed it with a 0.4mm nozzle at 0.08mm layer height, 10 wall loops and 9 top and bottom layers (which effectively causes 100% infill) in Bambulabs PLA Tough.