Baby Born Schnuller / toy doll pacifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pacifier for a Baby Born doll. Schnuller für eine Baby Born Puppe.
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 905
- Wydruki
- 6
- Wyświetlenia
- 3648
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a pacifier for the Baby Born doll of my daughter.
You'll have to print all 3 parts and stick them in each other. The pieces should hold together pressing them in each other with some force. If they turn out too loose (depending on filament and printersettings) I'd recommend to add hot or super glue.
Part 1 is contained twice because I noticed the doll from 2017/18 needs a slightly smaller diameter than the one from 2019/20.
Baby Born Schnuller neu - Part 1.stl = larger diameter (10.5mm)
Baby Born Schnuller alt - Part 1.stl = smaller diameter (10mm)
Part 1 is printed flat but you can easily bend it while it is warm (either right after the print or after placing for about 1 minute on the 60°C heated bed).
My kids also enjoyed coloring the items on their own as I am a little limited in available filament colors. So simply printing the pieces white and let the kids do the rest is an option as well. ;)
Update: 23.02.24:
Added heart shaped part as an alternative design. :)
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
Printed with various PLA filaments. No Support needed.
Category: Toys & Games