Liczymy pasujące modele…
I sent my 6 months old baby to day care service and the staff asked me to bring a cap for the pacifier rather than a storage box. However, there's no cap available for MOYUUN pacifier. So, I design one by myself. I use ASA since it is…
A box that fits into a 20mm thick frame beam of a toddler/child bed to keep all the pacifiers your baby needs. It implements the following features: Large box for all the pacifiers your baby needs All round comers in order to avoid…
Pacifier, Dummy Cake Topper Modern and simple cake decoration. Infill: 30% Layer Height: 0.18mm I used diffenent layer heights for the different colors.
Pacifier, Dummy Cake Topper Modern and simple cake decoration. Infill: 30% Layer Height: 0.18mm I used diffenent layer heights for the different colors.
Keeps the pacifier from falling to the ground. Printing: Print everything in the given orientation with 0.2mm layerhight. No support needed. Using PETG is recommended, since PLA might deform over time. After printing KeyRing part, the…
Dummy/Pacifier holder to mount on wall with double sided tape. Made to hold several dummies that are 56 mm wide but as long as dummy nipple is less than 25mm it will work. Get in touch if any size adjustments need to be made.
Pacifier case - two variants - with and without loop for hanging. No support needed. Print in place. Loop variant works great with my 50mm and 70mm carabine model: https://www.printables.com/model/1058736-carabine/files Scale up or down…
This is a pacifier cover to protect the business end of a Soothies pacifier from the elements while it's not in the babys mouth. It snaps over the whole rubber part, and stays on pretty well even while being jostled around. Update…
I sent my 6 months old baby to day care service and the staff asked me to bring a cap for the pacifier rather than a storage box. However, there's no cap available for MOYUUN pacifier. So, I design one by myself. I use ASA since it is…
I wanted to put extra pacifiers in my son's bed in an easy-to-find location in case he wakes looking for a pacifier. I printed it on the side with supports between the two hangers, with 15% infill but 100% infill on the connections (open…
I couldn't find some toy pacifiers that would fit the various toy baby's mouth sizes and shapes so I made some up. Rafts: No Supports: Yes Infill: 20% Filament material: PLA
Wanted to make a magnet to send to friends and family along with photos of my little ones. Took the design from Wowe and sliced off the insert. I used a super glue and used these magnets ‘https://tinyurl.com/bd6jx829’. Recommending that…
Please adjust the length, width and depth to your desired dimensions!
TAKES SOME 1/2 AND 1/4 INCHO DOWELS. SPLIT FOR PRINING. flash light on the original was a little thin on the rail connecter, beefed it up.
Commercial license available here: https://www.patreon.com/CookyStl This baby shower cookie cutter STL set includes a Hello Baby arch, cloud, bow, baby bottle, heart, and pacifier-style cutter files. It’s a digital cookie cutter set…
Designed to hold Soothie type pacifiers, but should fit others as well. Will take 3 stacked vertically. No supports needed and should print comfortably with a larger layer height (.28 in my demo-print). Infill needed is minimal (10-15%)…
Pour transporter proprement la tétine dans un sac ou accroché sur le côté. Les 2 petits crochets de chaque côtés permettent d'attacher des petits élastiques pour tenir la tétine. Elle est adaptée aux tétines "Luc et Léa" qu'on trouve en…
Ciucciobello My youngest daughter loves Cicciobello Amicicci dolls. She got many, but not all of them came with a pacifier, and they were fighting for them. So, I made and printed some extra pacifiers for the little troublemakers. Print…
Chupete para los muñecos KSI Meritos. Pacifier for KSI Meritos dolls. Print instructions Category: Toy & Game Accessories Print Settings Notes: La pieza es muy pequeña, así que debe imprimirse con una resolución bastante alta. It is a…
Is it a social commentary on escapism or a funny functional print? Kind of a silly project, this takes the electronics from a small $20 vape (a “Hippie Nano +”) and just repackages it into a working pacifier-shaped case. A size 6 pacifier…
Built in Tinkercad, took measurements off the newborn pacifier, and the clip for the larger pacifier, and kind of winged it from there. Category: Replacement Parts
My daughter’s old pacifiers were designed when she was little. She is now playing mom with these babies and using these modified pacifiers and she’s very happy.
This allows you to utilize your grease gun to grease the bearings on the prusa rather than buying the .5 oz packs from prusa. I printed this in ABS with a 10mm brim. No supports needed. The bottom collar has a spot for an O-Ring, though…
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
I created the Metalworker’s Pacifier when I was too cheap to buy a new chip collector, and I didn‘t like the large size they always came in. Printing the parts: The print is straightforward, but you need to make sure that the parts stay…
Custom baby pacifier clip strap mixing hard (PLA) and flexible (TPU) filament All parts printed with no supports. TPU print: Baby pacifier strap - strap PLA print: Baby pacifier strap - topEnd Baby pacifier strap - topEnd cap Baby…
A supersized pacifier to keep the fluff silent! Not for a real mouth! It's a fun accessory~ Instructions: print all parts glue the "bolt" into the "button" glue the "bolt+button" into the "shield" glue the "nuk" onto the…
Inspired by the "MAM Original" pacifier I created a fursuit pacifier. Just put everything together, add a bit of super glue to keep it secure! The clip just snaps onto the button. This is a fursuit/costume prop and not intended for real…
This pacifier is inspired by the NUK Classic design. Just put everything together, add a bit of super glue to keep it secure! Put the ring in some hot water for a bit to snap it on without breaking it :) This is a fursuit/costume prop and…
This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…
A lot of child, a lot of doll but only one Pacifier… a receipt for a disaster :-) Now there is no problem as they now have anough Pacifier for everyone… but I know… they'll find something else now :-P Easy to print and kids love them.…
LM8UU lubricant adaptor (Bearing pacifier) based on the model from Ri3del that incorporate a cap over the injector when in storage. My remix is to implement an injector that locks into each bearing similar to the Prusa supplied bearing…
Just to clip a chain to a pacifiers from Mam If you download and/or find it usefull, do not forget to leave a like for this model
This is a remix based on the two models https://www.thingiverse.com/thing:3440524 (base for the thread) https://www.prusaprinters.org/de/prints/32359-prusa-lubricant-lm8uu-adaptor-bearing-pacifier (adaptor) For a detailed instruction for…
Remixed model form HazardousOmegas sundvik pacifier box to fit the benlemi tery housebed.
The Pacifier-class Sector Patrol Cruiser was a very popular warship during the High Republic era. It has a crew of 100. Known Pacifier-class Cruiser are the Marillion (Light of the Jedi), Yekkabird (Light of the Jedi), Galliance (Shadows…
This is a box for hanging in bed frames with a thickness of 20 mm. If required, please create a remix, the original Fusion 360 file is available. A grid in the base ensures good ventilation. Printed in PETG with 0.3mm layer heightan 20%…
I've designed a pacifier for the Baby Born doll of my daughter. You'll have to print all 3 parts and stick them in each other. The pieces should hold together pressing them in each other with some force. If they turn out too loose…
We were tired of always searching for pacifier in the dark so I made a bin for pacifier (or whatever you want to put in) which clip on the side of the Sundvik crib. The bin is in two part to allow for no support but a small assembly. I…
The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…
An adjustable chain for a pacifier The chain is designed to be removable while the child is sleeping. Schnullaclipkurz is a shorter Version German: Eine anpassbare Kette für einen Schnuller. Die Kette ist so konstruiert dass sie während…
One of my first Testscans with the Openscan-System. Feels like the original, only no vapor... ;)
Simple and effective pacifier clip. Attach a string to through the circular hole of the pacifier clip and onto the ring on the back of the pacifier. The teeth on the clip will securely hold onto clothing without causing damage. I would…
I wanted a plug for my USB ports and thought this would be a funny. this can be printed vertically or horizontally. vertically looks better, but horizontally will be stronger. I print them vertically and only break them with conscious…
A box that fits into a 20mm thick frame beam of a toddler/child bed to keep all the pacifiers your baby needs. It implements the following features: Large box for all the pacifiers your baby needs All round comers in order to avoid…
Pacifier holder for cot. Holds up to 2 baby pacifiers and should fit most wooden cots. Designed for sidewalls with a width of 2 cm. (I am happy to send a modified size if needed)
Sur les photos, les clips du couvercle ne sont pas parfaitement centrés. Les fichiers d'impression ont été modifiés et le problème est résolu. Box to avoid leaving the baby's pacifier lying around. In the photos, the lid clips are not…
Classic red 'In Case of Emergency' box to hold a spare pacifier. This has been a lifesaver on many occasions. The hardest part is getting your wife to let you put it up in the nursery… The clear “glass” slides up and out of the way.…
Pacifier clip compatible with some MAM models: - MAM Air - MAM Mini Air - MAM Original This clip can easily added / removed even while your child is having the pacifier in his mouth or single handed.
