1 / 5
Prusa lubricant LM10LUU adaptor (Bearing pacifier)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tool for lubricating LM10(L)UU bearings.
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 545
- Wydruki
- 21
- Wyświetlenia
- 1559
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 21) (Komentarze: 24)Remiksy (0)Kolekcje (114)Powiązane
This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-)
Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel some resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, turn the bearing over and do the same thing from the other side as well. Then the bearing is lubricated sufficiently.
For 8mm bearings check my Prusa lubricant LM8UU adaptor