Star Trek - DS9 Raktajino Mug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Raktajino mug snugly holds a standard aluminum can. The design is based on screenshots from Deep Space 9.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 888
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my take on the Raktajino Mug from Deep Space 9. It is basically an aluminum can holder. The can in the photo is 12oz. There is a hole in the bottom to make it easier to remove the can. My print was done using a .6mm nozzle and .4mm layer heights. I used basic settings with organic supports. I did use infill modifiers for the handle and where the handle transitions into the body. I used a 50% infill in these areas and 15% everywhere else. Infill type was cubic. It took about 6hr 45min to print. Removal of the supports was very easy. It is very easy to print.
The mini mug was a test print (50% Scale). I will be keeping it to use as a Christmas Tree ornament.
I have attached a second model with it pre-scaled at 56% that nicely holds 4 AA Batteries. This model has a solid bottom.