Lulzbot Fan Shroud (M175 Style for SE Tool Head)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my M175 style fan shroud for Lulzbot SE Tool Head, which is found on the Lulzbot Mini 2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V2 Update: No seam
This is my M175 style fan shroud for Lulzbot SE Tool Head, which is found on the Lulzbot Mini 2 and other Lulzbot printers.
The M175 tool head has a fan duct that allows a clear view of a print as it happens, so I wanted to adapt it for the Lulzbot SE Tool Head. I used the original SE fan duct mounts and put them on a slightly modified version of the M175 fan duct.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
No
Resolution:
0.18
Infill:
20%
Filament: Polymaker PETG or ABS Any
Notes:
Recommended to print with temperature resistant filament like PETG, ABS, ASA to avoid warping due to heat. Make sure to print with the large flat side down, the same orientation it's installed at.
Design:
Used the open source model of the M175 fan shroud and the SE fan shroud, and mashed the two together using Solidworks. Fits the standard Lulzbot SE Toolhead.