MALM night stand clip able print in place IKEA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A night stand for the IKEA MALM which you can clip on the bed. It's sturdy! No clue, no screws! Big and Small Version.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 605
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is a small and a bigger version, just pick what you need. (The picture shows the small version)
Print in place use 4-6 walls/perimeters, no support.
To attach, start with the double-angled side and afterwards press down on the side of the mattress.
Yes, it is hard to push it in, but afterwards you have a stable solution. Sometimes it's too loose or too tight, in which case you just have to make it about 1% bigger or smaller (this comes from small differences in the wood).
To test, you can simply print a few layers and try out the fit.