Retractable Karambit Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foldable Knife/Stanley
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Retractable karambit knife designed based off CORRUGATORSUPERCILII cat claw box cutter and @OcularDynamic.
I started from scratch in Fusion because the design had some flaws in my opinion. I doubled the amount of magnets and made many form changes. All the parts are a bit thicker to accomodate nyloc m3 nuts and increase robustness.
I added a .STEP file :)
I printed everything in PETG. I recommend to print at least the hinges in PETG or ASA but PLA works just fine, just don't leave it in the sun or in a hot car during the summer!
Filament i used:
Blue: Zortrax Z-glass
Yellow: Fiberlogy Easy PETG
Assembly Parts
For Body:
4x - M3x20mm screws
4x - M3 Nyloc Nuts
For Blade:
2x - M3x5 Screws
2x - M3 Nuts (flat, without nyloc)
Magnets:
6x - 6x3mm