Fingerboard Dropdown Longboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fingerboard scale longboard designed to use standard fingerboard trucks (5mm x 8mm bolt hole pattern).
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 256
- Wydruki
- 0
- Wyświetlenia
- 908
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
A dropdown longboard to fit your fingerboard trucks to. I built this to be the proportions of a 45" longboard deck with 75mm wheels, scaled down to fingerboard size. Standard bolt hole pattern. The wheels are provided in two files – one with a 1.8mm bore through and one with a 2.0mm bore through for the truck axle. depending on your printer or how sloppy you want your wheels to be.
The board is reasonably flexy printed with 3 top and bottom layers and fun to cruise on. Without RKP trucks, it doesn't turn as well as you might want, but it's still fun to have a longboard on my desk.
The build shown is pre-grip tape, but standard grip tape for fingerboards should fit well enough as the working area of the deck is 30mm x 84mm.