Longer Probe Mount - SV06 - Height adjustable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer height adjustable probe Mount for the SV06 extruder, required for Volcano or K1 Hotend
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I screwed the K1 hotend to my Sovol sv06, which means the probe is now way too far away from the print bed.
This replacement bracket works as a drop in replacement part and allows the original sensor carriage to be used on longer hotends.
The height of the probe remains adjustable via the screw that attaches it, as in the original part.
Should also be compatible with Volcano and the SV06+ hotend.
I recommend printing it in ASA or ABS so that your sensor does not sink closer and closer to the print bed over time ;)
I would also recommend supports so that the slots for the sensor slide fit precisely.
Update: Added StepFile and STL