IKEA VINTERFINT Tree Coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the threaded rings that connect the sections of the VINTERFINT tree together.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a replacement coupler for the IKEA VINTERFINT line of artificial Christmas/Holiday trees. These are the things that join all sections of the tree together.
I noticed mine was lost from last year, so I re-created it from measuring. I added tolerances but It will be a tight fit; some sanding (for inside “outer ring_vinterfint attachment”) was required. Ideally print from a dark green material. I used PETG for mine since it is structural, but since this is decorative, I think PLA should work just fine.
I included the .BLEND file made for this project in case you need to adjust some tolerances. I used modifiers so adjusting them should not be too difficult (sorry I do not know how to use proper CAD software, but at least Blender is free).
NOTE: I am aware that IKEA released a new version for 2023 that has LEDs built in. I do not have that and therefore can not comment on if these couplers will work for you.