1 / 10
Phone Mount for Schwinn IC4 Exercise Bike — zdjęcie 1
1 / 10

Phone Mount for Schwinn IC4 Exercise Bike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Perfectly position a phone for exercise apps like Peloton and Zwift on the Schwinn IC4 Bike.

Ocena
0 / 5
Polubienia
10
Pobrania
60
Wydruki
0
Wyświetlenia
1342
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This stand is a big improvement over the one that comes with the exercise bike!  I designed it specifically for use with the Zwift App and for the iPhone plus sized models.

  • It places the phone in a more upright orientation (see second picture)
  • The stand is closer to the rider 
  • It is smaller and more stylized
  • Is for a horizontal orientation like the apps
  • The shorter size wont block the view of a TV behind it
  • It comes in two styles: a veroni pattern of organic spaces, and a solid version if you prefer that look instead

How to install

  1. Remove the existing media holder from the IC4 bike by unscrewing the 3 screws. 
  2. Attach this holder with the same 3 screws. 
  3. Place iPhone in case and set horizontally in slot

Dimensions for Phone compatibility:

  • Gap - the gap on the bottom is 13.75mm wide where the phone sits 
  • Height of back panel - 82mm tall
  • Width - 165mm

It fits my larger iPhone 12 plus with a case on it easily as shown in the pics. 

Printing Tips

  • .2 or .25 layer height
  • Print the orientation as shown in the pics
  • Use PETG if possible, or a good PLA+.
  • 3 Perimeters
  • Organic Supports (veroni version only, plain version needs no supports), .25 detach distance
  • 20% infill

In vigorous riding the bike can shake and the phone might move a little and then slide out to one side. To prevent this use a small kitchen bag clip or two zip ties connected to each other to secure the phone into the stand. I used two zip ties, connected as a single longer unit, and made a vertical loop around the phone and stand on the left side. If you push the right side of the phone down it interfers with the power button on an iPhone so securing the bottom/left is is better.

 

Tagi