FormD T1 Custom Mod Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
handle, feet and rear panel spacers for FormD T1
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 276
- Wydruki
- 0
- Wyświetlenia
- 4073
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom parts collection for the ITX PC case FormD T1, including handles, feet, and rear panel spacers.
To assemble you need:
- each Handle 3x M3x8mm screws, 3x M3 hex nuts
- each Feet 2x M3x8mm screws, 2x M3 hex nuts
- GPU spacer 2x M3x4mm screws
- M/B panel spacer 2x M3x6mm screws, 2x M3 hex nuts
Assembly Handle:
Secure the handle to the top panel using M3 screws and nuts. While it's possible to directly use nuts on panel, I recommend using a 'nut bracket' to avoid scratching the panel. The handle has versions for the front and rear, so be careful not to mix them up!
Assembly Feet:
Secure the legs to the bottom panel using M3 screws and nuts. While it's possible to directly use nuts on the panel, I recommend using a 'nut bracket' to avoid scratching the panel.
Assembly GPU Spacer:
Print spacers according to the size of the GPU you will use and fix them with M3 screws.
Assembly M/B Spacer:
Secure the M/B spacers using M3 screws and nuts.
Assembly M19 Cover:
Print a design of your choice, either A or B, and fit it into the M19 hole.
Note:
- My case version is v2.0, and it accommodates a 67mm CPU cooler and uses in GPU 2 slot mode. 'GPU_Spacer_B20.stl' fits perfectly.