FormD T1 Custom Mod Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
handle, feet and rear panel spacers for FormD T1
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 276
- Makes
- 0
- Views
- 4,073
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a custom parts collection for the ITX PC case FormD T1, including handles, feet, and rear panel spacers.
To assemble you need:
- each Handle 3x M3x8mm screws, 3x M3 hex nuts
- each Feet 2x M3x8mm screws, 2x M3 hex nuts
- GPU spacer 2x M3x4mm screws
- M/B panel spacer 2x M3x6mm screws, 2x M3 hex nuts
Assembly Handle:
Secure the handle to the top panel using M3 screws and nuts. While it's possible to directly use nuts on panel, I recommend using a 'nut bracket' to avoid scratching the panel. The handle has versions for the front and rear, so be careful not to mix them up!
Assembly Feet:
Secure the legs to the bottom panel using M3 screws and nuts. While it's possible to directly use nuts on the panel, I recommend using a 'nut bracket' to avoid scratching the panel.
Assembly GPU Spacer:
Print spacers according to the size of the GPU you will use and fix them with M3 screws.
Assembly M/B Spacer:
Secure the M/B spacers using M3 screws and nuts.
Assembly M19 Cover:
Print a design of your choice, either A or B, and fit it into the M19 hole.
Note:
- My case version is v2.0, and it accommodates a 67mm CPU cooler and uses in GPU 2 slot mode. 'GPU_Spacer_B20.stl' fits perfectly.