(tr)uSDX Stand with ATU-10 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wedge Stand for the (tr)uSDX with Storage Space; Optionally, mounts on top of the ATU-10 Antenna Tuner
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 1095
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This Wedge Stand for the (tr)uSDX , inspired by @w5aug, is a complete redesign to include Storage space for power and/or usb cables, connectors, Mini Mic, etc.. The Back Cover is a press-fit; It may be tight at first. The Stand can be used by itself, or mounted on top of the ATU-10 QRP Antenna Tuner Enclosure for a compact setup.
The Stand and Enclosure are oriented to avoid the need for Supports in the voids. I used Supports on the mating Tab/Slot and the Guardrails.
The Stand uses a Battery Box compatible Back Cover to keep it secure; The STL file for the Bottom_Cover_Battery I believe is the original by DL2MAN from when it was still available for download. I may be mistaken. Anyway, I've included it in the File List for your convenience.
There is an optional Call-Sign Plaque; Customize and CA glue in place. If you do not have the capability to add text, message me your call sign and email address and I'll send you over an STL when I have the time.
Note: The ATU is a slip-fit; Wrap a piece of tape around it before sliding it in to snug it up.