1 / 2
Nevermore V6 Auxiliary cooling fan shroud for Voron V0 Dragon Burner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom fan shroud that converts a Nevermore V6 into an auxiliary cooling fan for Voron V0 printers
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 1491
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (44)Powiązane
A custom fan shroud that converts a Nevermore V6 into an auxiliary cooling fan for Voron V0 printers with Dragon Burner toolheads.
The shroud is printed as two separate parts (A and B) that will fit the V0 bed which are later glued or acetone welded together.
Note: This model was explicitly modeled and tested for the Dragon Burner toolhead and will likely not be a perfect fit for the stock toolhead. But perhaps some minor scaling of the model might be enough.
Required material:
- 2 x 6x3 magnets