1 / 4
Fanatec McLaren GT3 Wheel VoCore Screen 4" and 5" — zdjęcie 1
1 / 4

Fanatec McLaren GT3 Wheel VoCore Screen 4" and 5"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for an VoCore USB Display to be mounted to the front of a Fanatec McLaren GT3 steering wheel.

Ocena
0 / 5
Polubienia
29
Pobrania
213
Wydruki
0
Wyświetlenia
2836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Case for a 4" or 5" screen designed to be used in conjunction with the Fanatec McLaren GT3 steering wheel. It requires a sponge tape on the back of the screen to prevent movements, and perhaps a small drop of hot glue on the USB mount to keep the connector secure.

It utilizes the original holes and screws of the steering wheel; only a USB cable is needed to connect it to the PC using SimHub.

Use supports to achieve an acceptable finish on the front of the model, and remember to use as many walls and filling as possible.

 

VoCore Screens: VoCore | Coin-sized Linux Computer
Example of Spiral USB Cable: https://amzn.eu/d/aHx6Usc

 

I have decided to create my own model after researching extensively and finding very little information. The few models I found were either paid or of low quality. 

I encourage you to download it and, if possible, share photos and any questions you may have. I'm here to help.

Tagi