1 / 2
Low profile 3/4" PVC vacuum nozzle for pizza oven — zdjęcie 1
1 / 2

Low profile 3/4" PVC vacuum nozzle for pizza oven

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clean deep in your pizza oven or other tight place with 3/4" PVC extension

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I couldn't effectively vacuum the back of my pizza oven to remove burnt whatnot and crumbs after scrubbing with a wire brush.  Prusa, Fusion 360, and a short piece of 3/4" PVC to the rescue!

 

I printed this out of PETG, oriented with the PVC socket on the build plate and with a brim (no additional supports necessary) in about 1 hour 20 minutes, using my Prusa MK4 without Input Shaping.

 

 

I included the .f3d file for fine tuning.

Please comment and add a picture if you find this helpful.

Tagi