Ender 3 (and subsequent versions) nozzle wiper [REMIX]

Modified version of a design from racustomworks (cults3d.com).

Made the Brushholder, more compatible for silicon brushes. Made the walls thicker for sturdyness. and added larger radius on the corners.

Changed the bracket to be more angular for aestetics ( printed at 20% infill ). Added (in step files) a text box to add a unit number for printfarms etc.

Add a layer fillament change for the aforementioned text if you want it in a contrasting collor.

The silicon brush i'm used is rated for 300C, i will make my own moulds soon to cast some out of high temp silicon.

Print the brushholder at 100% infill with supports. 

Print the baseplate at 10-20% infill without supports.

Reccomended to add washers to spread the “load” 

Requires: PETG/ABS fillament, 2x M3 threaded inserts, 2x M3 screws, 2x M3 washers.

Disabled any form of sharing/remixing for THIS specific model. If you do want to remix it. please take the original creators STL. So this person gets the trafic. 

NOTE: Added Baseplate [Blank] V2 [More Clearance sideframe] as i got a message that some printers apearantly have less of a gap on the side then me, causing it to crash into the side frame. So print this one if you need more space between your Z extrusion and your printbed. If you need more clearance in the X direction because the bed ( wiper ) crashes into the Z frame. Print out the Wiper Mk 2. You can mix and match the parts accordingly. They are intercompatable.

I do reccomend if you print out the Baseplate V2, to add a bit of kapton tape or aluminium ductape to the back of the Wiper MK 1 or 2, as it will be in direct contact with the bed. Its ok at lower temps, but if you run the bed at 100C, this will/can melt the back of it if not properly isolated. No need if you are using the baseplate V1 as theres an ample gap.

Also be sure to mirror the part depending if you put it on the right or left side.