GLD-112 (Antipersonnel Landmine)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Chinese GLD-112 is one of the smallest Anti-Personnel landmines ever made.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 615
- Wydruki
- 2
- Wyświetlenia
- 2050
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Standard Digital File License
Material: PET-G
Support: Yes
Infill: 10 - 15 %
I printed from PET-G, but it will not be a problem to print from PLA.
The layer height was 0,2 mm.
It was printed only with supports on the printing pad! If you put supports everywhere, you won't get a safety pin through the pressure plate.
Since the mine is used for training and teaching, I tried to capture its function. To make it work you will need a compression spring 40 - 60 mm long, 27 mm outside diameter and a wire thickness of 1.5 mm maximum.
You can of course assemble the mine without the spring, but you won't get the desired effect.
The fine spider webbing on the surface is undesirable, but unfortunately I am not a skilled enough printer to remove it. I use a gas torch to remove it. I quite like to sand the surface of the mine with sandpaper to give the mine a "patina" look.
The original color is green.
STL and 3MF only.
I look forward to seeing your versions of this mine!
Unfortunately someone (I know who) is taking my models without mentioning my name and then selling them for money on other 3D databases. I have a license for all my models. For this reason I am considering legal action if the author concerned does not delete the models. Until then, unfortunately, I will not be adding any more models that I have already prepared.
Please, the models on this profile are my own and I will be happy to share them with you, but please download them for your own use. Follow the license.