Liczymy pasujące modele…
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…
I printed from PLA and PETG. To save filament you can reduce the density of the filler to 5%. You will need external material to make it up. You need a wire (one that won't break when bent) that you attach to the underside of the liner…
Currently very frequently used anti-personnel mine in Ukraine. It consists of five parts. I printed from PLA and PETG. The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical…
Material : PET-G Support : Yes Infill : 10 - 15 % I printed from PET-G, but it will not be a problem to print from PLA. The layer height was 0,2 mm. It was printed only with supports on the printing pad! If you put supports everywhere,…
A Yugoslav mine frequently used in the Yugoslav conflict of 1991-2001. The mine has both a trip and a pull safety. It belongs to the category of "bouncing" mines. When initiated, the mine is thrown approximately 1.2 m above the ground…
This mine is the predecessor of the soviet PFM-1 mine known as the butterfly mine. Originally from the United States. It was used primarily in the Vietnam War. It was discontinued in the 1970s. Its design and principle was subsequently…
Material : PET-G (PLA) Infill : 10 - 15 % Support : Yes - read bellow This is a very simple mine. Rather than a mine, it is its casing. The principle of the mine is to screw the explosive mechanism into the body of a standard 200 g tritol…
Material : PET-G/PLA Infill : 10 - 15 % Supports : Yes (on printing pad) Layer height : 0,2 mm Nozzle : 0,4 mm (Prusa MK IV) You don't need anything to build it. No glue, no spring. It's very simplistic, but the principle remains. If you…
Fully working trip wire landmine / boobytrap, The mine works with trip wires which releases a hammer that detonates a snap cap from a cap gun. only requires 3 small parts, a rubber band and come caps. It has two modes of operation,…
Material : PLA-Prusament Infill : 15 % Supports : Yes The model is not functional. It has no moving parts in it. Only the head and the body are threaded. The head cover is adapted so that it can be glued to the head. Imitation of a…
It's an Italian bouncy mine. The pressure plate is movable up and down by means of a spring and is fitted into the mine body by means of a twist system. Spring dimensions: 37 mm x 14 mm (outer diameter) x 1.5 mm wire thickness.
Material : PLA - Prusament Supports: Yes Infill : 15 % You will need a compression spring with a diameter of 27 mm, a wire width of up to 2 mm and a length of at least 58 mm. Without the spring, the footplate will not return to its…
I printed from PET-G, but PLA is probably a better filament. All the parts fit together. Only after printing did I realize I could make the internal mechanism from one part and not two. I won't change it though if it works. Maybe it's the…
classic prop that will go boom
Material : PLA-Prusament Infill : 15 % Supports : Yes The model is made up of three parts, but only two are needed. The head and body are the main parts. The cover is optional. Mine has no moving parts (springs). Only the head and body…
Material: PLA Nozzle: 0,4 Layer height: 0.2 mm Printer: Prusa MKIV The model of this mine is made of moving parts that imitate the actual operation of the mine. The real MGP-31 mine is armed by sliding the bolt out of the mine body, which…
Printed from various materials (PLA, PETG) Mine is not functional. it is only static. To improve the appearance you can use a piece of wire to simulate a cotter pin. The threads fit nicely Watch out for the supports. Unfortunately someone…
Material: PET-G or PLA Infill: 15 % Support: Yes I've printed with PET-G, but it shouldn't be a problem to use any other material. Layer height 0,2 mm (nozzle 0,4 mm). Mine is only for demonstration. It is not functional, but I tried to…
Material : PLA or PET-G Infill : 10 - 15 % Supports : Yes Layer heigth : 0,15 - 0,2 mm Nozzle : 0,4 mm According to some sources, this is a Czech anti-personnel mine PP Mi Ba. Interestingly, this version never made it into the arsenal of…
An Israeli mine with the simple name "No 10". It's an anti-personnel mine. The mine has a pressure plate. It uses a twist system, so all you have to do is insert and turn. I printed from PETG, but only because I don't have black PLA…
I don't have enough filament at the moment, so I haven't printed it yet. It is a very simple model, made in one piece. There are very few sources on the internet that adequately describe this mine, so this model is for display only. It is…
"little sister" of the MAPT-78-F2 mine (which you can find on my profile). Printed from PLA. It is a very simple mine based on a hand grenade. The mine simulates the real look and function of a real mine. To make it work you will need a…
Material : PET-G Infill : 15 % Support : Yes I printed from PET-G, layer height 0,2 mm. Nozzle 0,4 - Průša MK IV. This is a very simplified but FUNCTIONAL model! The arming and securing works the same as the original model. It only…
Material : PLA, PETG, … Infill : Yes Support : You dont need them Layer height : 0,15 - 0,2 mm nozzle : 0,4 mm This is the original PP Mi Ba mine as used in the Czech army. Its use is forbidden today. The mine as such is only the upper…
EDIT: finally printed. Mine folded up nicely, however don't print the cover part.... it just doesn't fit and it's hard to take out. It won't bother anyone if you don't put it in. Functional model of Italian mine AUPS. The real model of…
TM-200 TNT Demolition Block (Training Aid / Display Replica) The TM-200 is a meticulously designed, plastic-cased TNT demolition block that serves as a realistic training aid or collectible display. This block has been crafted to…
Barbell landmine attachment for home gym workouts.
Type 93 Japanese Landmine for Display. Also a set of stamps for markings. you will need 4 plastic D rings, I just ordered a few off Aliexpress, 10mm or 15mm one should do the trick. You will need to print 2 of the handles to attach to the…
Having recently gotten back into my other passion of weight lifting, I recently came into possession of a landmine attachment for my power cage. Because of this, I have worked more landmines into my regular routine. A great use of the…
Landmine Print main body with supports. ESUN PLA + Layer Height .15
Coupled with another model to add a landmine attachment to any fitness rack. Printed with 7 walls to create a mostly solid plastic sleeve. Sleeve features 12mm holes. Accessories for full setup: 4x12mm OD (8.5mm bore) sleeve bearings…
This is an adapter to connect a portable landmine (exercise equipment) to a stationary post on a weight rack. Brand of portable landmine: Everstrong…
Why This Project? I sometimes do landmine rows with my coach, Fabien —a great exercise for building back muscles while minimizing lower back strain. Until now, we’ve been jamming one end of the barbell into a corner, wrapped in a cloth to…
It is a landmine for various excercises using your 2" olympic sized barbell. Works as a Landmine Base or a Landmine Grip Usage Just slide this landmine over the end of your barbell, and excercise. When you are done working out, use the…
Going to be honest, this probably needs either a lot of work or a lot of hand fitting. It's already pre-sectioned for printing on a Bambu Lab X1, but if you want it to be solid and look good you'll need to put in a lot of epoxy, bondo,…
A landmine-shaped fidget clicker that uses a replaceable Cherry MX-style mechanical keyboard switch for tactile feedback and an audible click. Includes three base versions: a flat desk base, a base with a keychain hole and a loop handle…
Why This Project? I sometimes do landmine rows with my coach, Fabien —a great exercise for building back muscles while minimizing lower back strain. Until now, we’ve been jamming one end of the barbell into a corner, wrapped in a cloth to…
It is a landmine for various excercises using your 2" olympic sized barbell. Works as a Landmine Base or a Landmine Grip Usage Just slide this landmine over the end of your barbell, and excercise. When you are done working out, use the…
