PMN - 4 (Antipersonnel Landmine)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Russian PMN-4. Circular, plastic, Anti-Personnel landmine, delay-armed, pressure-actuated,
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 1026
- Wydruki
- 0
- Wyświetlenia
- 2419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Standard Digital File License
Currently very frequently used anti-personnel mine in Ukraine.
It consists of five parts. I printed from PLA and PETG.
The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical bending.
The parts fit together nicely. For a more realistic look to the mine, use beige filament for the bottom and middle parts and black for the cap and ring.
The inner part is actually a pressure plate. It doesn't work on the principle of spring compression as with other mines, but like the PMN-2 mine, it works by having to deflect either edge sheet off axis.
I use organic supports. You will need a 3mm diameter cotter pin.
For personal use only.