Miter Track Block for Toggle Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sliding T-track block for a miter saw station with inset for a toggle clamp, typically used as a hold down.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked the way the original model fit the t-track, but instead of a stop block I wanted a sliding toggle clamp to hold down the work piece. The two parts should work well together for secure/repeatable cuts.
Printing Tips
I printed with the top facing down. This works great except the inset may have long-ish bridges if unsupported. I added snug supports there, but it may not be needed. Also I used 3 perimeters and 20% gyroid infill in PETG for a strong part.
Hardware
Toggle Clamps: https://a.co/d/aoacPtM
Screws (non-countersunk screws may be better): https://a.co/d/6ok9XXq
T-track Knobs (you may prefer standard t-bolts): https://a.co/d/6pqZKDN