Miter Track Block for Toggle Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sliding T-track block for a miter saw station with inset for a toggle clamp, typically used as a hold down.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 126
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I liked the way the original model fit the t-track, but instead of a stop block I wanted a sliding toggle clamp to hold down the work piece. The two parts should work well together for secure/repeatable cuts.
Printing Tips
I printed with the top facing down. This works great except the inset may have long-ish bridges if unsupported. I added snug supports there, but it may not be needed. Also I used 3 perimeters and 20% gyroid infill in PETG for a strong part.
Hardware
Toggle Clamps: https://a.co/d/aoacPtM
Screws (non-countersunk screws may be better): https://a.co/d/6ok9XXq
T-track Knobs (you may prefer standard t-bolts): https://a.co/d/6pqZKDN