Soldering Light and Fumes Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toxic soldering fume extractor and handy light in one.
- Ocena
- 5 / 5
- Polubienia
- 479
- Pobrania
- 361
- Wydruki
- 5
- Wyświetlenia
- 7872
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Soldering produces toxic fumes that can be dangerous. For this reason the use of a fume extractor is recommended. This one has also handy lighting, so you can see the soldering process perfectly.
You need a bit of DIY to assemble it, but we're in the soldering section so it will be a piece of cake for you.
I printed the model out of three parts with almost no supports. Then I glued them together. If you don't mind using more supports, you can print them in one piece.
Parts needed:
- radial cooling fan - 12V, 50 mm
- two bolts 20 mm and nuts
- LED strip lights - 12V
- 12V power suply or 5-12V voltage stepup
I used a 5-12V voltage stepup because I wanted to use a 5V power bank as a power supply. If you use a 12V power supply, you don't need the stepup.
The LED strips are wired in parallel with the fan.