Soldering Light and Fumes Extractor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toxic soldering fume extractor and handy light in one.
- Rating
- 5 / 5
- Likes
- 480
- Downloads
- 362
- Makes
- 5
- Views
- 7,900
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Soldering produces toxic fumes that can be dangerous. For this reason the use of a fume extractor is recommended. This one has also handy lighting, so you can see the soldering process perfectly.
You need a bit of DIY to assemble it, but we're in the soldering section so it will be a piece of cake for you.
I printed the model out of three parts with almost no supports. Then I glued them together. If you don't mind using more supports, you can print them in one piece.
Parts needed:
- radial cooling fan - 12V, 50 mm
- two bolts 20 mm and nuts
- LED strip lights - 12V
- 12V power suply or 5-12V voltage stepup
I used a 5-12V voltage stepup because I wanted to use a 5V power bank as a power supply. If you use a 12V power supply, you don't need the stepup.
The LED strips are wired in parallel with the fan.