Counting matching models…
It can be mounted on the “Articulating LED desk lamp” arm by Gladius. For that you need to print the “Housing for Articulating Arm”. But there also is a normal Version of this solder fume filter, wich I usually use myself, for that just…
The size of the containers is 2U x 2U (84 x 84 mm). Each hole is 23 x 23 mm.
This is currently sized for a larger vehicle, you may need to fiddle with the scale to make it work with smaller cars.
Here is a simple fumes extractor for soldering. It uses a 120mm 12v fan and 130x130x10 carbon filters that are easy to find online. It has an M6 screw going out in the bottom. This makes it possible to mount it in some soldering their…
Supports are only needed for the filter support part. This part should be printed with the "mounting lip" facing upwards. Very simple soldering fumes extractor based around a 140mm computer fan that I had lying around and some carbon…
Individual honeycombs can be connected with glue and attached to the wall with double-sided tape .
This is the first model I've ever created in Blender, and while there’s definitely room for improvement, this is the best I could achieve for now. The main reason I designed this is because my K2 produces a strong smell when printing,…
Smoke exhaust is important when using a laser, it keeps the lens clean and removes most of the smell from burning material. Some dust collectors will do the job, but the laser sticks 20mm out of the toolholder plate so check if that is a…
This will allow you to vent the fumes from laser engraving directly to the outside of the work area. This requires creating a hole thru the wall to install a permanent vent to the outside. Use whatever material you chose as it does not…
This is a simple but effective design to block dust for getting into your 3D Printer - This Model is specifically for the P1S as it has the P1S Lettering on it. Please print on 0.08 mm or 0.12 mm.
Es un ESENCIERO de estilo antiguo, realizado desde la imaginación y sin modelo, perfectamente FUNCIONAL. El tapón del esenciero hace la función de dosificador El fichero ZIP contiene dos (2) archivos, un archivo STL y un archivo 3MF por…
I created my own soldering fume extractor with carbon filter from ZELMER vacuum. 120mm fan. Filtr Hepa 5000.0050K / ZVC
I <3 FUMES Air fresh activated carbon filter for 5020 FAN. You can place it anywhere you like. A Base station for it will follow soon. The 5020 Fan sucks the air near the hotbed and also by example by ASA produced toxic fumes to filter…
this is my v2 of soldering fume extractor : feel free to watch build and test video: part list : threaded inserts ( m3x4x4 ) 9x m3 screws m6 nut & bolt i used 1x10x250 copper bar to make the pins for the battery 40x40 sever cooling fan…
Soldering Fumes Extractor with 120 mm fan and coal filter. The whole part consists of the main housing and the lid. The lid is available in two flavors: for a metal flip switch with thread diameter of 6 mm or a plastic rocker swith with…
A clean, elegant and compact way to display your parfumes samples and Decants.
INTRODUCTION All the printer I have have a fumes extraction system. I made this box because I wanted also my SnapMaker U1 to have also the fume extraction system, and since the U1 is already enclosed, only the top cover was required. What…
Keep your favorite scents safe on the go! This compact, rugged travel case securely holds up to four standard 10ml perfume rollerballs or spray vials. Designed with a print-in-place hinge and a satisfying, secure snap-closure, it ensures…
Versión en español Un soporte elegante y funcional diseñado para organizar y exhibir tus fragancias favoritas. Ideal para mantener tu tocador, baño o estante ordenado, evitando que las botellas se deslicen o se caigan de su lugar.…
Built for a Chinese 4040 laser cutter - 4 screw holes. Chimney diameter: 15 cm Conçu pour une découpeuse laser chinoise 4040 - 4 trous de vis. Diamètre de la cheminée: 15 cm
I had a fan from a failed project and decided to use it for something practical. The fan grills are made from infill. I drilled the connector hole, but you can use negative volumes to create holes in slicer.
Build an inexpensive yet fully functional and effective soldering fumes filter using a 120mm computer fan and carbon filter. The front makes it possible to angle the fan either horizontal or slightly upwards. Hardware needed: 120mm fan 4x…
The assembly should be self explainable, the feet should be pressed into the body as far as possible, the slots became narrower to the end so the feet don't loose to easy. I suggest printing the body laying flat and the feet upright. Be…
This is replament for original fumes extractor. This one is build around much stronger 120mm fan from Sunon PMD2412PMB1. Bottom parts needs M3 inserts to screw both elements, fan is just located iside and doesn't need any screws. There is…
Another variation of fume extractor for soldering It uses 120mm fan with higher CFM power, and activated carbon filters to filter some of nasty small particles I also glued small LED strip on top of cover so it can shine some ligh on…
FRANÇAIS Pour les français, les détails par là: https://blog.arofarn.info/2019/06/19/extracteur-de-fumee-de-soudure-et-lampe/ ======================== ENGLISH This is a fume extractor (yes, one more !) with LED strip embeded to act as a…
I had a need to keep solder flux fumes out of my face whilst doing soldering on my electronics projects. There are plenty of solutions that are available for purchase. For me this is a simple mechanical project with some incorporated…
As I had some IKEA Tertial Lamps laying around here, I decided on upcycling one of them. This is a solder fumes extractor which is to replace the lamp head of an IKEA Tertial Lamp. I am using a BeQuiet! Silent Wings 3 High Speed Fan with…
Soldering produces toxic fumes that can be dangerous. For this reason the use of a fume extractor is recommended. This one has also handy lighting, so you can see the soldering process perfectly. You need a bit of DIY to assemble it, but…
This fumes extractor can hold 1 or 2 fans and carbon filters. You'll need: 2x 120mm fans (25mm in depth or thinner). Or you can use 80mm ones, printing the adaptor part (2x) 2x 130mm carbon filters (e.g.…
can be mounted on many third hand soldering kits for 4020 Fans
a sign that can switch to “safe ” to “not safe ” air condition put glue in the corners and on middel of the sides
