1 / 6
Soldering Iron Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple soldering iron holder with place for soldering accessories.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Simple soldering iron holder with a small compartment for soldering accessories and place for a container with a brass sponge for cleaning the soldering tip. It was made for Ersa Multitip soldering iron, but any similar type should fit without any problem. It is simple print. Print settings could be adjusted to own prefferences. I printed it with 3 pereimeters and 15% infill - the holder is stable and rigid.
Print settings:
- Layer height: 0.3 mm
- Perimeters: 3
- Infill: 15%
- Material: PETG