Soldering Iron Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.50 – €6.73 net (excluding VAT)
For file: SolderingIronHolder_0.3mm_PETG_MK3S_4h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.11 excluding VAT (range midpoint).
- Weight reported by the author
- 110 g
- Print time reported by the author
- 4.86 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple soldering iron holder with place for soldering accessories.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 64
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple soldering iron holder with a small compartment for soldering accessories and place for a container with a brass sponge for cleaning the soldering tip. It was made for Ersa Multitip soldering iron, but any similar type should fit without any problem. It is simple print. Print settings could be adjusted to own prefferences. I printed it with 3 pereimeters and 15% infill - the holder is stable and rigid.
Print settings:
- Layer height: 0.3 mm
- Perimeters: 3
- Infill: 15%
- Material: PETG