Little Tikes - Replacement Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on a screw from the Little Tikes "Home Improvements 2-Sided Workshop" set (Model #4146)
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Print with the head of the screw against the buildplate. I used these printer settings:
Infill: 70% infill density with gyroid pattern
Supports: Only touching buildplate for 70deg
Build Plate Adhesion: Raft
The part could probably work with a lower infill, but because it will be played with by 3-4 year olds that are rough on toys, I used a higher infill than necessary. The part will stick without the raft adhesion, but it kept the edges less sharp. The first one was printed with “skirt”. It printed fine, but needed to be filed down on the edges that were against the buildplate.
Modeled after screw from Little Tikes "Home Improvements 2-Sided Workshop" set (Model #4146). I have tested it on the workshop itself and the screws work in all the holes.