Little Tikes - Replacement Screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on a screw from the Little Tikes "Home Improvements 2-Sided Workshop" set (Model #4146)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 86
- Makes
- 0
- Views
- 596
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Print with the head of the screw against the buildplate. I used these printer settings:
Infill: 70% infill density with gyroid pattern
Supports: Only touching buildplate for 70deg
Build Plate Adhesion: Raft
The part could probably work with a lower infill, but because it will be played with by 3-4 year olds that are rough on toys, I used a higher infill than necessary. The part will stick without the raft adhesion, but it kept the edges less sharp. The first one was printed with “skirt”. It printed fine, but needed to be filed down on the edges that were against the buildplate.
Modeled after screw from Little Tikes "Home Improvements 2-Sided Workshop" set (Model #4146). I have tested it on the workshop itself and the screws work in all the holes.