Meltorp Enclosure Locking Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable solution to make your large format IKEA enclosure considerably more secure.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I built some IKEA Meltrop tables to house my ender 5 plus, after assembly the legs wern't 100% true and the tables were able to be slid apart if someone were to bump it hard enough, potentially damaging the printer.
I designed and printed these feet to lock all the componants together for a considerably sturdyier construction and had the added benefit of making all of the legs 100% true.
These have been designed to print with no supports despite the small overhang to allow the printed parts to clip into the lower table, these were printed on my terrible ender 5 plus with a .6mm nozzle and .4mm layer height.
The “(Optional)” files are for if you decide to use a third table top as a base making it possible to house 3 printers total or just give in my opinion a better look.
The last photo shows the print orientation.