Anderson Powerpole Faceplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of Anderson Powerpole faceplates that go from 1x1 to 5x4, with and without screw holes.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This all originated because I needed a three-by-two mounting solution on the side of a box and couldn't find a quick, cheap or convenient solution so I made one. And while I was at it I made a few more, so I hope you find these helpful.
Important info.
. The hole will comfortably fit an M4 Bolt.
. Recommend printing on a flexible print bed as the narrow profile can be difficult to break free.
. You will need to print two of the same parts and flip one to complete the set.
. this is my first upload.