1 / 3
Anderson Powerpole Faceplates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A collection of Anderson Powerpole faceplates that go from 1x1 to 5x4, with and without screw holes.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 71
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This all originated because I needed a three-by-two mounting solution on the side of a box and couldn't find a quick, cheap or convenient solution so I made one. And while I was at it I made a few more, so I hope you find these helpful.
Important info.
. The hole will comfortably fit an M4 Bolt.
. Recommend printing on a flexible print bed as the narrow profile can be difficult to break free.
. You will need to print two of the same parts and flip one to complete the set.
. this is my first upload.