XLR Jack TRS RCA Cinch Solder Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple XLR TRS RCA Solder Support (designed for Neutrik but others brand may fit also...) (Multi-material Print)
- Ocena
- 4,5 / 5
- Polubienia
- 248
- Pobrania
- 1270
- Wydruki
- 6
- Wyświetlenia
- 4238
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My device is also physically sold at the FI7 shop Liège
A Simple Neutrik XLR / TRS Jack 6.3 / RCA solder Support
For those who, like me, sometimes have to solder dozens of XLRs a day...
This bracket will make your life easier :)
Works also for Cinch/RCA Neutrik Ningbo
Especially for the 6.5 jack:
The indications give the name of the contacts, not the name of the solder side arrangement.
The order of the Tip(+) Ring(-) Sleeve(G) contacts may be different on the solder pin side, depending on the manufacturer.
Use Multimaterial panting feature for the lettering.
As a simple feedback for the work, thank you for liking and posting your making!
I'm always happy to see your prints
Here's another useful tool I've designed in the past:
https://www.printables.com/model/382601-ic-pin-straightening-tool-for-dil-dip-integrated-c
Happy printing !
If you like my work and would like to support me, don't hesitate to make a small donation on Ko-fi. https://ko-fi.com/renba
Every contribution counts and allows me to continue creating and partly pay for the filament I use to validate the parts I create.