1 / 9
EZPass Toll Tag Holder For New Format v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better E-ZPass holder for your highway speed pass. Suction cups provide easy removal to move pass between cars or…
- Ocena
- 4,5 / 5
- Polubienia
- 20
- Pobrania
- 263
- Wydruki
- 4
- Wyświetlenia
- 2121
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (35)Powiązane
Better E-ZPass holder for your highway speed pass.
Suction cups provide easy removal to move pass between cars or storage when not in use.
Features
- Fits the new model E-ZPass in the northeast and other areas.
- Snug but not tight fit.
- Can use the suction cups from the older model. See the photos with dimensions of the suction cup.
- Pass slips in and out easily.
- Small raised bumpers on side to prevent sliding in and out accidently. Press the underside of the EZ-Pass to lift it easily over the bumper.
- This version has no back to minimize heat absorption in a very hot car. This minimizes warping. (Be sure to use the appropriate filament for your climate. See MISC notes.)
- Versatile mounting
No need to gum up your window with the double stick tape that comes with the tag. Just peel it off and use this instead.
Video
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
15
Filament:
Hatchbox PETG Copper
Notes:
Printing Notes
* Be sure to print this with a filament that can withstand heat. PLA is not recommended unless you live in a cold climate year round. PETG, Nylon or other high heat filament recommended. CARS GET VERY HOT IN SUMMER SUN.- I did not need supports
Category: Automotive