Drawer front panel mount brackets

Mounting brackets for drawers front panel incl. holes for handles. There are two different versions, one for 9mm and the other for 21mm.

BOM:

• Siebdruckplatte/Screenprinting plate 9mm or 21mm
• M6/M4S Ruthex inserts (2x M6 and 2x M4S for each bracket)
• M6 screws to mount the panel on it
• M4 scews to mount the bracket (best one countersunk and one flathead or cylinderhead screw

Printing the bracket: best on the side with supports to get nice holes

@modifiers: to get more wallthickness for the inserts and stability for the brackets i have added an 3mf file from bambu studio, there are modifiers on all walls and holes in the right place.

@mid hole: if your inserts are a little bit longer than the thickness of the bracket, you have to drill it with 6mm to get rid of the outer “insidesurface”

@Spacer brackets:  there are two files (9mm/21mm) to print some space brackets, just messure your drawer and shorten or extend the brackets for the right size. when mounting them have a look if they are flush with the mountingbrackets, if not turn them over :-)

In case of a handle you could use this one (M6 x 10mm or 12mm countersunk screws depending on the thickness of your front panels, I had 3mm Aludibond plates)

Because of the heavy drawers I used Prusament PC jet black.