Drawer front panel mount brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
front panel mounting brackets for drawers incl. handle mounting points
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Mounting brackets for drawers front panel incl. holes for handles. There are two different versions, one for 9mm and the other for 21mm.
BOM:
- Siebdruckplatte/Screenprinting plate 9mm or 21mm
- M6/M4S Ruthex inserts (2x M6 and 2x M4S for each bracket)
- M6 screws to mount the panel on it
- M4 scews to mount the bracket (best one countersunk and one flathead or cylinderhead screw
Printing the bracket: best on the side with supports to get nice holes
@modifiers: to get more wallthickness for the inserts and stability for the brackets i have added an 3mf file from bambu studio, there are modifiers on all walls and holes in the right place.
@mid hole: if your inserts are a little bit longer than the thickness of the bracket, you have to drill it with 6mm to get rid of the outer “insidesurface”
@Spacer brackets: there are two files (9mm/21mm) to print some space brackets, just messure your drawer and shorten or extend the brackets for the right size. when mounting them have a look if they are flush with the mountingbrackets, if not turn them over :-)
In case of a handle you could use this one (M6 x 10mm or 12mm countersunk screws depending on the thickness of your front panels, I had 3mm Aludibond plates)
Because of the heavy drawers I used Prusament PC jet black.