Cardin S449 remote case for sun visor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is to attach the remote to the sun visor. I made it for my Cupra Born (should also fit on VW ID.3).
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to have a fixed place in my car for the remote so I never need to search for it.
So I adapted a case for the Cardin S449 remote to be attached to the sun visor.
It is meant to attach from the upper side. That is why the clip is protruding so that it is not in the way (thus crashing into the ceiling) and you can still open sun visor to its maximum.
The clip was designed for the Cupra Born (VW ID.3 should have same). On other cars the clip may be too long or too short.
Use M3x6 or shorter screws to attach cover.
You need to open the m3f file as a project as there are some modifiers. Also support etc has been tweaked to print it with less issues.